The Baier UKS series combines a manual hydraulic puller with a matched adjustable bearing separator for suitable external pulling tasks. It is designed for maintenance teams, repair workshops and industrial tool distributors sourcing equipment for bearing and gear removal.
The range includes six rated capacities from 6 to 20 ton. Each combination pairs a specified UK puller with a K3 separator, allowing buyers to compare the tool capacity, pulling reach and accessory dimensions before selecting a set.
The hydraulic unit is integrated into the puller assembly and operated using a pump handle. Three pulling jaws surround the central ram, while adjustable jaw positions help accommodate different component geometries and access conditions.
The illustrated configuration operates without a separate external hydraulic pump. Before applying load, check that the jaws are securely engaged and the puller is aligned with the shaft. Correct positioning is essential for the selected pulling arrangement.
The three-segment K3 separator is adjusted using threaded connectors. It provides an additional support arrangement for compatible bearing removal tasks when component geometry and available clearance allow.
The listed UKS combinations use two separator sizes:
K3-100: opening diameter d of 26–100 mm
K3-160: opening diameter d of 50–160 mm
UKS-6N and UKS-10NC are paired with K3-100. UKS-8IN, UKS-12INC, UKS-15IN and UKS-20INC are paired with K3-160. Each listed set includes its specified separator, rather than both sizes.
Select a hydraulic bearing puller by checking both rated capacity and physical fit. Pulling reach, jaw access and separator clearance must suit the component being removed. A higher capacity alone does not confirm that a puller will fit the application.
Use the table below to compare the six UKS combinations. If the required pulling force or available engagement is uncertain, send component dimensions and installation photos for review.
Model | Rated Pulling Capacity (ton) | Pulling Reach (mm) | Matched Separator | Set Combination |
|---|---|---|---|---|
UKS-6N | 6 | 165 | K3-100 | UK-6IN + K3-100 |
UKS-10NC | 10 | 195 | K3-100 | UK-10INC + K3-100 |
UKS-8IN | 8 | 210 | K3-160 | UK-8IN + K3-160 |
UKS-12INC | 12 | 240 | K3-160 | UK-12INC + K3-160 |
UKS-15IN | 15 | 240 | K3-160 | UK-15IN + K3-160 |
UKS-20INC | 20 | 275 | K3-160 | UK-20INC + K3-160 |
Moving the pump handle advances the hydraulic ram and applies pulling force through the selected setup. The image illustrates handle operation; it does not show a loaded bearing removal task.
Before use, select a suitable capacity, inspect the tool, secure the jaw engagement and align the puller with the shaft. Apply force gradually and follow the operating instructions for the supplied model. Do not exceed the rated limits of the puller or its accessories.
UKS sets can be used for suitable external bearing and gear removal tasks during industrial machinery maintenance. Typical requirements include bearing replacement, component servicing and workshop repair where the tool can achieve secure engagement.
Application suitability depends on the component shape, fit, pulling force and access around the shaft. Check clearance behind the component and along the pulling direction before selecting the jaw or separator arrangement. The application images illustrate component types rather than guaranteed compatibility with every installation.
Each UKS combination listed above includes a specified hydraulic puller and its matched K3 separator plate. The photo shows a sample tool arrangement with a carrying case and a detail view of the pump handle assembly.
Confirm the complete accessory list, packing method and supplied documentation when requesting a quotation. For orders covering multiple models, list each required UKS model and quantity so the configurations can be checked individually.
To help us review your application, please provide:
Component and shaft dimensions
Required pulling reach and available engagement
Working clearance around the component
Application photos and required pulling force, if known
Quantity and destination country
Distributors can also include their target model range and purchasing requirements. Baier provides a 12-month warranty under the agreed warranty terms. Contact us to confirm the suitable configuration, accessory scope and quotation for your order.
Each listed combination includes a specified UK hydraulic puller and one matched K3 separator plate. Confirm additional accessories, packing and documentation in the quotation.
The illustrated UKS configuration has an integrated hand-operated hydraulic unit, so a separate external pump is not required.
Check the required pulling force together with pulling reach, component dimensions, jaw engagement and available clearance. Bearing diameter alone is not enough to determine the correct capacity.
K3-100 has a listed opening diameter d of 26–100 mm, while K3-160 covers 50–160 mm. They are paired with different UKS models as shown in the selection table. These dimensions describe the separator opening, not the full puller's jaw spread.
It can be used for suitable external bearing and gear removal tasks when the component provides adequate engagement and clearance and the required force is within the tool's rated capacity.
Baier provides a 12-month warranty under the agreed warranty terms. Include the product model and details of the issue when requesting assistance.
Explore our hydraulic puller range to compare tool configurations, or contact Baier for model selection.
Baier Hydraulic Power (Wuhan) Co. Ltd is a high-technology enterprise, the company has been keenly focused on integrating research, development, production, sale and service of torque wrench, hydraulic cylinders, nut cutter, hydraulic pullers, hydraulic pumps, and so on. We own a modern production plant of 12, 000 square meters, this incorporates an internationally advanced hydraulic tools production facility, material processing line, tools assembly line, and other packaging equipment facilities.